 
|
5A Normally Open Temperature Switch Bimetal KSD9700 Thermal Switch
Product Details:
| Place of Origin: | China |
| Certification: | UL VDE CQC |
| Model Number: | KSD9700 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 2000 |
|---|---|
| Price: | USD $0.15~$0.25 per piece |
| Packaging Details: | 200pcs per bag, 5000pcs per carton |
| Delivery Time: | 15 days |
| Payment Terms: | T/T |
| Supply Ability: | 50K pieces per month |
|
Detail Information |
|||
| Item Name: | Thermal Switch, Bimetal Thermostat, Thermal Protector | Part No.: | KSD9700 |
|---|---|---|---|
| Voltage Rating: | 250V | Current Rating: | 5A 10A |
| Tf: | 40~155 Degree | Mounting Type: | Radial Leaded |
| Life: | 6000 Cycles | Case Type: | Metal Or Plastic |
| Case Dimension: | 20.3x7.4x3.7mm 20.5x8x4mm | Lead Length: | Customized |
| Lead Gauge: | 18AWG | UL Listed: | Yes |
| RoHS Compliant: | Yes | Halogen Free: | Yes |
| MPQ: | 100pcs | MOQ: | 1000pcs |
| Highlight: | 5A Normally Open Temperature Switch,Bimetal Normally Open Temperature Switch,KSD9700 Thermal Switch |
||
Product Description
250V 5A 10A KSD9700 Normally Open Closed Thermal Protector Bimetal Temperature Controller Switch Thermostat
Product Description
| item Name: | KSD9700 thermal switch, bimetal thermostat, thermal protector |
| Closing Type: | Normally Closed, Normally Open |
| Rated Voltage: | 250Vac |
| Rated Current: | 5A 10A |
| Electric intensity: | >800V |
| Contact resistance: | <30mΩ |
| Insulation resistance: | >100MΩ |
| Response speed: | ≦1℃/min |
| Life cycles: | >6000(Resistive Load) |
| Tolerance: | ±5℃ |
| Approvals: | UL VDE CQC |
| Wire Spec: | 22AWG, 180℃, 600V, RoHS, black, customized length |
What's the difference between N/C and N/O
Normally Closed: When the temperature falls to the reset temperature, the thermostat contact can be connected again. (If the reset temperature is not reached, the thermostat contact is also disconnected)
Normally Open: When the temperature falls to the reset temperature, the thermostat contact can be disconnected again. (If the reset temperature is not reached, the thermostat contact is also connected)
Product Features
- small size,
- quick action,
- accurate temperature control,
- large current control
- long service life
- Wide used in home appliance's motor and electrical equipment, such as air conditioner motor, transformer, thermal appliances, etc
Specification
(KSD9700 thermal switch, thermal protector, bimetal thermostat)
Dimension & Structure
KSD9700-A is metal case while KSD9700-B is plastic case.
How it works?
KSD9700 series thermal protector consists of dish-shape high sensitive bimetallic elements,
movable contact-head, static contact-piece, soleplate, outer case, heat-resistant leads and so
on.When it is in operation, the bimetallic elements are in a free state and the movable
contact-head and the static contace-piece are closed and the circuit is on.When the electric
appliance malfunctions and causes temperature to rise to the action temperature of the thermal
protector, inner stress is produced inside the heated bimetallic elements and the bimetallic
elements act instantly -pushes the movable contact-head away from the static contact-piece,
thus cutting off the faulty circuit and protect the appliance.When the temperature of the electric
appliance to be protected drops to the rated reset temperature, the bimetallic elements restores
to its initial state and contact is closed .The electric appliance restores its working condition.
This product has many advantages, such as low resistance, fast temperature sensing, prompt
action, safety and reliability, small size and so on.
Please Note :
- During installation, the temperature switch should be completely close to the mounting surface of the tested appliance.
- Do not collapse or deform the plastic / metal shell during installation.
- For metal temperature controller, when using, do not remove the insulating sleeve to avoid electric leakage. Not suitable for working in water.
- Not suitable for air temperature sensing, only applies to contact sensing.
Standard Package
100pcs per bag, 20000pcs per carton
Shipping Term:
EXW, DDU, DDP, C&F, FOB
Shipping Methods:
International Express, By Air, By Sea
Selection of the Fuse and Holder Solution
The first step is to answer the following questions:
- Will the fuse need to accessible for replacement?
- How often will the fuse need to be replaced?
- Should the end customer of the appliance have access to change the fuse?
- Should the fuse only be accessible from outside the appliance?
- How much is available to spend on safety and reliability?
5.1.2. Requirements and characteristics
The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:
- IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
- UL-standard no. 512.
-
-
Company warehouse
-
Q: Are you trading company or manufacturer ?
A: We are a fuse product factory.
Q: How long is your delivery time?
A: Generally it is 3 days if the goods are in stock, 5-10 days if the goods not in stock, according to the quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: 100% in advance, T/T.
250Vac