 
|
400V 60A Three Phase Electric Wall Mounted Electric Boiler Water Heater Thermostat KSD308
Product Details:
| Place of Origin: | Guangdong,China |
| Brand Name: | Tianrui |
| Certification: | ROHS |
| Model Number: | KSD308 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 500pcs |
|---|---|
| Price: | Negotiable |
| Packaging Details: | Carton |
| Delivery Time: | Stock available |
| Payment Terms: | T/T, Western Union, MoneyGram,Paypal |
| Supply Ability: | 15000pcs per month |
|
Detail Information |
|||
| Ir: | 60A | Ur: | 250V |
|---|---|---|---|
| Rated Temp.: | 50-150℃ | Material: | Plastic And Metal |
| Contact: | Nomally Closed | IP Level: | IP53 |
| Insulation Resistance: | Under Normal≥100MΩ | Contact Resistance: | ≤50M Ω |
| Highlight: | 60A Electric Boiler Water Heater Thermostat,400V Electric Boiler Water Heater Thermostat |
||
Product Description
| Type | KSD301 Thermostat |
| Product Name | 400V 60A Three Phase Electric Wall -Mounted Electric Boiler Water Heater Thermostat KSD308 |
| Rating Current | 60A |
| Rating Voltage | 250V |
| Rated temperature | 50-150℃ |
| Reset Type | Automatic |
| Insulation Resistance | Under Normal≥100MΩ |
| Contact Resistance | ≤50M Ω |
| Material | Plastic,Metal |
| Electrical Strength | A: between the shell and the wiring terminal, it can withstand AC1500V/ 0.5ma and does not break down or flash for 1min. B: after disconnection, it can withstand AC800V/ 0.5ma, 3S without breakdown and flicker. |
The Details
Working Principle
Bipolar jump thermostat is a bimetal thermostat with a shell. The use of disc-type bimetallic film in the role of the moment under
the principle of instantaneous beating, through the role of mechanical structure, so that the two groups of contacts quickly
action to achieve the same time to disconnect or turn on the purpose of bipolar circuit.
Usage
Widely used in a variety of electric appliances, such as hot water heater, fast-type (fast-type) electric water heater, water
storage type electric water heater, small water heaters, solar water heaters,with overheating protection.
Instructions for Installation and Use
1. Grounding: The metal cover of the temperature controller is connected to the ground metal parts of the device.
2. The thermostat should work in the general indoor environment where the relative humidity of the air is not greater than 90%,
non -corrosive gas, flammable gas and electric conductive dust exist.
3. When the thermostat uses contact with the temperature, the cover should be covered with the heating part of the charged
appliance, and the thermal conductivity of the heating silicon grease or other performance should be applied on the cover of the
temperature.
4. The top of the cover cannot be crushed or deformed to avoid changing the temperature or other performance.
5. Do not let the liquid penetrate inside the thermostat! The shell must avoid excessive power to prevent cracks; the shell should
be kept clean to prevent pollution of conductive substances, so as to avoid short -circuit penetration due to the reduction of
insulation performance.
6. The use process cannot bend the wiring terminal, otherwise it will affect the reliability of electrical connection.
Bonnie Chan
E-mail:admin@tianrui-fuse.com.cn
Mobile:+86-180 2522 7727
Whatsapp:+86-13712758342
Wechat1:fusechina
Wecaht2:halobee9
Skype: tianruifuse05